Home
     Company
           Products
                 Plant
                       Contact
 
 


Sahand Carpet Company has 6 weaving machines with the brand of CRM72 by Van De wiele from Belgium. The looms equiped with electronic jacquard devices allow flexible planning and programming. A removable hard disk is taken out of the design computer and plugged directly into the loom to produce the desired design. The width of looms are 410 Cm and the reed is 320 and with the possibility to make more dents different qualities could be produced from 1500 gram/Sqm up to 3500 gram/Sqm.





At present, Sahand Carpet makes 4 differnet qualities Tehran, Naqsh Jahan, Tabriz and Gebbeh which we have provided a specification table with detail technical information.

Weaving   Specification Table

 









The microprocessor monitors all machines function and provides a complete production follow up.

The raw material for carpets are as following:

  1. Pile Yarn: 100% Polypropylene BCF-Heat Set (by Sahand Carpet)
  2. Wrap Yarn: Polester/Cotton (by Parsa Novin Company)
  3. Jute Yarn: (From Bangladesh)
The incorporated system makes the dead pile Yarns to be weaved through wrap and weft of carpet to give more strength to the carpet as well.

Sahand Carpet has special attention to the finishing of carpets and with the aid of 60 people takes care of the tasks for stregthening up the carpets as well as making them look more beautiful with the high tech finishing machines from sellers of U.K. The capacity of this section can reach to 10,000 Sqm/day in two shifts.

Out of weaving machines, the carpets will be drived to this section and will be first inspected for the quality and those obtaining required rate will proceed for latexing and after drying up the carpets gets into the shearing machine to make up the surface of carpets and will be cut in lengths by Tanghe cutting machines.

Sahand Carpet by having glueing machine and fringing one is able to either make the carpets without or with fringes. After fringing and overdeging tasks are done the final quality control will be performed.

 









 

 

Technical Characteristics

100% PP BCF

PP HEAT - SET

 

TEHRAN

NAQSH - JAHAN

TABRIZ

GABBEH

POINTS/M2

163200

307200

307200

448000

REED

320

320

320

320

SHOTS / 10 CM

51

96

96

70

WEAVING TECHNOLOGY

V 1/2

V1/2

V1/2

V1/2

YARN / DN

2300

2600

3000

2*1900

PILE HEIGHT

6

11

11

11

PP YARN WEIGHT
GR/M2

580

1580

1780

1570

TOTAL WEIGHT
GR/M2

1450

2500

2700

2600

 




 

   Designed and Maintained by Parspake